We are now in the age of IoT, AI, and Machine learning. Any problem including some of the rarest problems with no solution now has the smartest solution. One such problem was Accident Identification. Identifying an accident and delivering necessary equipment to the spot was a huge challenge for ages. We have developed an accident identification and alerting system to solve this problem.
We have come up with a solution so smartly that it will take a few seconds. It will identify an accident and the location of that accident. Our system has a multifunctional response system. That will also help you analyze the cause of the incident.
Let us consider your child is on a school bus. Somehow the driver of that bus crosses the safety limit speed then our system will send a message to the school authority that the bus is now crossing the safety limit of the speed. If some accident happens and anyone on that bus press 1 of the keyboard in our system then it will send a message to the registered mobile numbers that an accident happens but it is not serious. For key 2 it shows that the accident is serious, etc.
If anyone is not able to press any particular key it still sends messages to the registered mobile numbers. You can also track the spot of the accident using Google Maps on your smartphone.
When anyone presses any key on the keypad it sends input to the microcontroller. Then it checks the purpose of that input and sends a signal to the GPS+GSM MODEM and LCD display. Now GSM modem sends an SMS to the registered mobile numbers and also GPS will help you to track the location.
The speed of the bus is going to be measured continuously by an Accelerometer sensor. The speed will continuously be analyzed by the microcontroller. If the speed of the bus crosses the safety limit then the microcontroller will send input to the GPS+GSM MODEM and also to the display. Now this GSM will send a message to the registered mobile number that the speed crosses the safety limit.