Power Transformer Parameter fault detection System

Project Cost: 5,400

Project Code: 1280

Order Now

Description of the project:

The Power Transformer Parameter fault detection System is one of the sensor based projects for final year which can be used in Power transformers. This project is used to monitor the parameter of the Power transformer. If any fault is detected then it will be intimated using a buzzer or using GSM technology. We have measured four basic parameters of the transformer. Oil level, temperature, current, and voltage. We have used 2 sensors in this project, a temperature sensor and a level sensor for the Oil level. And we have used 2 potentiometers to give a demonstration of voltage and current.

Description in detail:

It contains the following blocks:

  1. Microcontroller
  2. LCD Display
  3. Sensors

You will get the following documents with this project:

  1. Project Report in pdf format and in doc (word) format
  2. Circuit diagram
  3. PCB layout
  4. Microcontroller program in assembly language
  5. Hex file of the microcontroller code
  6. Datasheets of all the components / ICs used in the project
  7. Power point presentation / PPT file

Project Photographs:

Applications and Advantages of Power Transformer Parameter fault detection System:

  1. This project can be used for the safety of transformers in urban as well as rural areas.
  2. This project can also be used for power transformers inside university campuses or inside any company’s premises.

Future Development:

1. We can interface a GSM modem to send this data through SMS

Video of the Power Transformer Parameter fault detection System project

Youtube video coming soon… The video is not available right now, we are planning to upload a video soon. Meanwhile, you can watch the video of GSM based Power Transformer Parameter fault detection System project.

Questions and answers about this project:

Question: Can we implement GSM technology to implement SMS based projects?

Answer: Yes, we can do that. Visit this project – Project code: 1680 – GSM based Power Transformer Parameter fault detection System

Block diagram of Power Transformer Parameter fault detection System project

View Comments

  • we are running a project center EZEE TECH SOLUTION in trichy,Tamilnadu. we wish to buy projects in at hols sell reated. kindly send me the topics and discounted prize for us

  • send me the quotation for the following kits

    1.MICROCONTROLLER BASED ELECTRICITY THEFT CONTROLLER
    2.POWER DISTRIBUTION AND STATUS MONITORING SYSTEM
    3.POWER FACTOR MONITORING AND CONTROL SYSTEM
    4.AC MOTOR SPEED CONTROLLING SYSTEM USING PWM TECHNIQUES

    • Hi Akshay hanumante, Microcontroller used is: 89s51 and the GSM modem used is: sim900

  • In the demonstration, what was the rating of the transformer used? was oil level sensor used in normal transformers?

  • a run a training institute in delhi
    a need the list of project with their prices and discount on them

  • please send IEEE PAper of power transformer fault detection by using microcontroller 89S51

Leave a Comment
Share

Related Projects

Recent Projects

IOT Temperature and Humidity monitoring system using Arduino

IOT based Temperature Monitoring System using Arduino

About Microtronics

We are providing electronics projects to engineering students since 2005. Our website projectsof8051.com was launched in 2009. We are happy to serve thousands of electronics students and hobbyists in the last 15+ years.